The Delta-Q IC650 is a high performance battery charger capable of charging wet/flooded, AGM and Gel batteries. Ideal for industrial applications (work platforms, aerial / scissor lifts), floor machines, golf carts, electric vehicles, fork lifts and pallet jacks. The Delta-Q IC650 is equipped with an on-board USB port for to retrieve stored cycle data as well as performing software and charge profile updates.
Features
Multi-color LED indicator for AC Source, Battery Status, Charging, Error and Fault
Numeric Display for Charge Profile, Alarm / Fault Codes
Field Programmable with 25 Charge Profiles
Auto-Recharge for Low-Voltage in Maintenance Mode
OEM Customizable
Field Replaceable Cable design
Technical Information
DC Output
Maximum DC Output Voltage
54 Volts
Maximum DC Output Current
18.1 Amps
Maximum DC Output Power
650 Watts
Deep Discharge Recovery (Min Voltage)
1.8 Volts
Battery Type
Wet/ Flooded, Gel, AGM & Lithium
Reverse Polarity
Electronic Protection with Auto-Reset
Short Circuit
Electronic Current Limit
AC Input
AC Input Voltage Range
85 - 270 VAC
Nominal AC Input Voltage
100 - 240 VAC
Nominal AC Input Frequency
50 / 60 Hz
Regulatory Specifications
Efficiency
93.5% peak, California Energy Commission Compliant
Safety
UL1564, CSA 107.2, EN 60335-2-29, AZ/NZS60335 (RSM)
Emissions
FCC Part 15 / ICES003 Class A, EN55011, EN 61000-6-4
Immunity
EN 61000-3-2, EN 61000-3-3, EN 61000-6-2
Mechanical Specifications
Dimensions
25.2 x 18.6 x 8 cm (9.9 x 7.3 x 3.1”)
Weight
< 3 kg (< 6.5 lbs)
AC Input Connector
IEC320 / C14 (requires country-specific cord)
DC Output Connector
M6 threaded fasteners for ring terminals
Mounting Holes
Allows for safe installation on shelf, wall or bulkhead
Cooling
Normal operation in any orientation with passive cooling
Enter your shipping information below to receive a shipping estimate.
Note: The shipping estimate calculates for one of these products. To calculate shipping for more than one add your desired quantity to your shopping cart.