Delta-Q IC650 24V 27A Battery Charger, COMM Unit
* SHIPPING INFORMATION *
The Delta-Q 940-0004 battery charger is a special order item and will ship within 7-10 business days.
Delta-Q IC650 940-0004, 24V 27A High Frequency Battery Charger
Introducing the Delta-Q IC650 940-0004, a high-performance 24V 27A high-frequency battery charger equipped with a COMM/CAN Bus port. This advanced charger is designed to deliver efficient and reliable charging for a wide range of battery-powered equipment. Featuring state-of-the-art high-frequency technology, the IC650 ensures optimal charging performance, extending battery life and enhancing overall system efficiency. The integrated COMM/CAN Bus port provides seamless communication and data management, making it ideal for modern applications requiring precise monitoring and control. Perfect for industrial, commercial, and recreational use, the Delta-Q IC650 940-0004 is your go-to solution for dependable battery charging needs.
Features
Multi-color LED indicator for AC Source, Battery Status, Charging, Error and Fault
Numeric Display for Charge Profile, Alarm / Fault Codes
Field Programmable with 25 Charge Profiles
Auto-Recharge for Low-Voltage in Maintenance Mode
OEM Customizable
Field Replaceable Cable design
CANbus / COMM Port
Technical
DC Output
| Maximum DC Output Voltage | 24 Volts |
| Maximum DC Output Current | 27.1 Amps |
| Maximum DC Output Power | 650 Watts |
| Deep Discharge Recovery (Min Voltage) | 1.2 Volts |
| Battery Type | Wet/Flooded, Gel, AGM & Lithium* |
| Reverse Polarity | Electronic Protection with Auto-Reset |
| Short Circuit | Electronic Current Limit |
AC Input
| AC Input Voltage Range | 85 - 270 VAC |
| Nominal AC Input Voltage | 100 - 240 VAC |
| Nominal AC Input Frequency | 50 / 60 Hz |
Regulatory
| Efficiency | 93.5% peak, California Energy Commission Compliant |
| Safety | UL1564, CSA 107.2, EN 60335-2-29, AZ/NZS60335 (RSM) |
| Emissions | FCC Part 15 / ICES003 Class A, EN55011, EN 61000-6-4 |
| Immunity | EN 61000-3-2, EN 61000-3-3, EN 61000-6-2 |
Mechanical
| Dimensions | 9.9" x 7.3" x 3.1” |
| Weight | 6.5 lbs |
| AC Input Connector | IEC320 / C14 (requires country-specific cord)* |
| DC Output Connector | M6 threaded fasteners for ring terminals |
| Mounting Holes | Allows for safe installation on shelf, wall or bulkhead |
| Cooling | Normal operation in any orientation with passive cooling |
| Service Port | Sealed (IP66) USB 2.0 Host Port |
*Delta-Q IC Series battery chargers do not ship with input or output cables/leads; unless stated otherwise. See our Delta-Q Accessories Page for additional components.
Environmental
| Enclosure | IP66 (NEMA4) |
| Mechanical Shock & Vibration | GMW3172 |
| Operating Temperature | -40° F to 149° F |
| Storage Temperature | -40° F to 185° F |
| Ingress Protection |
Charger rated IP66 (Complete protection against contact, dust, and powerful water jets) with sealed Delta-Q AC cord |
| Chemical | MIL 810-G, Method 504.1: Withstands exposure to chemicals typically found in application (battery acid, salt, cleaners, fertilizers, etc.) |
| Salt | Withstands 720 hours (30 days) salt spray test per GMW 3172 with 5% (w/w) salt solution (pH 6.5-7.2) at 35°C (95°F) without degradation of performance |
| Shock / Vibration |
Infrequent shock: 100g, 11ms half-sine pulse, 3 cycles in each of 3 axes |
| Humidity | 0 to 95% non-condensing |
| Altitude | < 15,000 feet derated above 20° |
Communication
| Communication / Signals | |
| Battery Temperature Input | Isolated Temperature Sensor Signals (mates w/Delta-Q isolated battery temperature sensors) |
| Charge Enable / Disable Input | PWM Signal |
| Interlock Signal | NP or NC (selectable) dry contact 0.5A fast-blow fuse (>100 VDC rated) required |
| Remote Status Indicator | Tri-Color: Red / Yellow / Green |
| CANbus | Isolated CAN-H, CAN-L, CAN-GND CANopen CiA 418: Battery and CiA 419: charger CANopen CiA 454: Light electrical vehicles (LEV) |
| Serial Communications | Modbus RTU |
Single Connector
6.3mm (1/4") Blade Terminals
- C1 - Battery Temperature Sensor (Negative / - )
- C1 - Battery Temperature Sensor (Positive / + )
- C3 - Interlock Signal
TE AmpSeal automotive connector (IP67 rated) mates with TE Connectivity AmpSeal Plug (p/n: 776273): Signals for CAN bus (isolated); Remote status indicators; Battery temperature sense; Interlock; Enable / disable; Modbus
| Part Number | 940-0004 |
|---|---|
| MPN | 940-0004 |
| Charger Mode | Automatic |
| Charger Type | On-Board |
| DC Cord Length | NOT INCLUDED |
| Dimensions | 9.9" x 7.3" x 3.1" |
| Amp Output | 27 Amp |
| Output Voltage | 24 Volts |
| Input Voltage | 120 Volts, 240 Volts |
| Charger Efficiency | 93% |
| Charger Application | Golf Cart, Industrial |
| CEC Compliant | Yes |
| COMM Port | Yes |
| Temperature Sensor | Yes |
| Interlock | Yes |
| Remote LED | Yes |
